產品詳情
所在位置: 首頁> 產品目錄> 二抗>

  • 產品名稱：Goatanti-FerretIgA,IgG,IgM(WholeMolecule)Antibody(Biotin)

  • 產品型號：
  • 產品廠商：Acris-antibodies
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
Goatanti-FerretIgA,IgG,IgM(WholeMolecule)Antibody(Biotin)
詳情介紹：
Immunogen Ferret IgG, IgA and IgM whole molecules.
Characteristics Molar Ratio: 10-20 BAC molecules per Goat IgG molecule.
Purification Immunoaffinity chromatography.
This product was prepared from polyspecific antiserum by immunoaffinity hromatography using antigens coupled to agarose beads followed by solid phase adsorption(s) to remove any unwanted reactivities.
Background Synonyms: Ferret IgA, Ferret IgG, Ferret IgM
Application Notes Suitable for Immunoblotting (WB 1/2,000-1/10,000) ELISA ( 1/20,000-1/100,000),Immunohistochemistry (1/1000-1/5000), Immunomicroscopy as well as other antibodybased assays using streptavidin or avidin conjugates requiring lot-to-lot consistency. Recommended Dilutions: This product has been assayed against 1.0?μg of Ferret IgG in astandard capture ELISA using Peroxidase Conjugated Streptavidin and ABTS (2,2'-azino-bis-[3-ethylbenthiazoline-6-sulfonic acid]) as a substrate for 30?minutes atroom temperature. A working dilution of 1/1,000 to 1/4,000 is suggested for this product.

Other applications not tested.
Otimal dilutions are dependent on conditions and should be determined by the user.
Restrictions For Research Use only
Reconstitution Restore with 1.0?mL of deionized water (or equivalent).
Concentration 1.0 mg/mL
Buffer 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride,?pH 7.2 with 10?mg/mL Bovine Serum Albumin (BSA, IgG and Protease free) as stabilizer and 0.01?% (w/v) sodium azide as preservative.
Preservative Sodium azide
Precaution of Use WARNING: Reagents contain sodium azide. Sodium azide is very toxic if ingested or inhaled. Avoid contact with skin, eyes, or clothing. Wear eye or face protection when handling. If skin or eye contact occurs, wash with copious amounts of water. If ingested or inhaled, contact a physician immediately. Sodium azide yields toxic hydrazoic acid under acidic conditions. Dilute azide-containing compounds in running water before discarding to avoid accumulation of potentially explosive deposits in lead or copper plumbing.
Handling Advice Avoid repeated freezing and thawing. Dilute only prior to immediate use
Centrifuge product if not completely clear after standing at room temperature.
Storage 4 °C/-20 °C
Storage Comment Store vial at 2-8 °C prior to restoration. For extended storage add glycerol to 50 % and then aliquot contents and freeze at -28 °C or below. This antibody is stable for one month at 2-8 °C as an undiluted liquid.
Background publications Bayer, Wilchek: "Protein biotinylation." in: Methods in enzymology, Vol. 184, pp. 138-60, 1990 (PubMed).